Replies to This Discussion

Permalink Reply by Rachel Coles on August 3, 2011 at 7:35am

Hey, I make these types of collapsibles with the 25mm tubing but I want to make these types of collapsibles with the thinner 20mm tubing. Can anyone out there in this hoop world share with me where I can get tubing from that is suitable to fit inside the 20mm tubing for the thin snap button collapsibles. Pleeeeeeeeeaase?? Pretty pretty please. Thank youuuuu :)

Permalink Reply by Shews *Eclipse* on May 12, 2010 at 1:31pm

that's awesome, i guess it really is about the connector. do you know if the 125 psi is ok to collapse into infinity?? i haven't tried it but am interested in making some for personal use.

• ▶ Reply

Permalink Reply by Kathy (HoopKat) Bellamy on May 6, 2010 at 7:02pm

I am interested in this topic... I tried to make my first one with 160 tubing and I could not get it to collapse. I read that you have to be forceful, maybe I am just not being agressive enough. I don't know if my connectors have a name but they are light grey in colour and about 5 inches long w/ribs on each end.

• ▶ Reply

Permalink Reply by Andrea of Karma Fitness* on May 12, 2010 at 6:17pm

I make my own infinity style hoops out of 160 PSI tubing. I make my own special swivel connectors and have never had any problems. I rivot the tubing onto the connector and I've never had the tubing fly off.

I sell pre-made infinity hoops without tape if anyone is ever interested... saves you from having to source tubing and making your own connectors.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page