Replies to This Discussion

Permalink Reply by Tara V. Hoops on September 4, 2010 at 8:22am

I have never tried it but I'm curious. They all say 12VDC power. So you need 12 volts of power to light them. Unless you are using giant tubing you can't really get a 12v battery in the hoop. You could, maybe, use several 3V batteries - but then you have 4 batteries. Not even sure if that would work. You would not want to put them together in the hoop as this would create a huge blank space and throw of the weight considerable - so then you need to wire them so that they are evenly distributed inside the hoop. I may some day buy one and try it out. For now I will stick with the method I use and start with speaker wire and single led's and go ahead and let my finger tips bleed.

• ▶ Reply

Permalink Reply by LEDCreations on September 6, 2010 at 7:31am

www.prodmod.com (they have kits available)

www.ledcreations.etsy.com (thats my site I could put together a kit for you as well if you are interested)

• ▶ Reply

Permalink Reply by Amelia on September 6, 2010 at 7:39am

Thanks-I didn't even notice the voltage needed...whoops!

• ▶ Reply